Yes, mona4 is another version, built on top of mona2 rather than on 1.10.77. It differs from mona2 in 150 bytes. MONA4.ASM is the MONA2.ASM source with those changes. When I assemble it, the result matches mona4.bin byte for byte, all 2048 bytes. Ive also attached the converted mona4.bin.

What changed from mona2:

I/O moved:
The 6530 now sits at $F600 instead of $F680. Only the equates changed: PA, PADD, PB, PBDD, T_1, T_64, T_1024, VORBEI and TREAD are each $80 lower.
Theres a new serial port at $F500$F502. It has no name in the listing, so I added three equates: SERIN ($F500, bit 7 is the input), SERFLG ($F501, tested at reset) and SEROUT ($F502, the output).
Teletype only:
The key-and-display cycle is bypassed. STP and DTCYC now jump straight to TTY.
The PA6 switch tests in TTY0 and TTY2 are replaced by NOPs.
RESTRT now tests SERFLG (BMI) instead of PB (BVC).
Serial routines rewritten: ASCIIN and TTYOUT now bit-bang on the new port, and ASCIIN preserves X. BAUD reads SERIN, and its PA6 escape is replaced by NOPs.
Small fixes:
In LADEN, a record with 0 bytes now goes back to LADEN instead of LADEN3.
In MNEMON, the PA6 test is replaced by CLC/NOP/NOP/BCC.

New labels in this version are ASC0, ASC2 and ASC3, plus the three port equates. The rest of the 1.10.77 comments and labels are kept. I dropped the 1.10.77 comments that described code no longer present: UMGESCHALTET, UMGESCHALTET?, PORT B ROLLBEREIT and WENN PA6=1 / NACH DISPL/TASTE. In mona4 those lines are NOPs or gone.